Back to Blog

GFRP vs TMT Bar Price in India: Per kg and Per Metre, by Diameter

October 31, 2026
RN Elements Team
5 min read
Coils of GFRP rebar in the RN Elements warehouse, Surat

Compare GFRP rebar and TMT bars by the kilogram and GFRP looks expensive. Compare them by the metre — which is how a slab, a wall or a tank is actually reinforced — and the answer reverses.

This page gives you RN Elements' current GFRP price, the TMT figure we compare it against, and a per-metre table for every common diameter from 6 mm to 32 mm.

The short answer

  • GFRP rebar from RN Elements: ₹140–160 per kg, depending on diameter, plus GST and transport.
  • TMT bar: we use ₹65 per kg for the comparison below. TMT prices move every week, so check your dealer's rate — the method works with any number.
  • Per kg, GFRP costs about 2.2–2.5 times as much as TMT.
  • Per metre, at the same diameter, GFRP costs 34–42% less, because it weighs about 3.7 times less.

Why per kg is the wrong comparison

Rebar is bought by weight but used by length. A drawing says "10 mm bars at 150 mm spacing", not "so many kilograms".

GFRP has a density of about 2.1 g/cm³. Steel is 7.85 g/cm³. So one metre of 10 mm GFRP weighs about 0.165 kg, while one metre of 10 mm TMT weighs about 0.617 kg. You pay more per kilogram for GFRP, but you buy far fewer kilograms.

Price per metre by diameter

Weights are approximate: TMT from the standard formula d²/162, GFRP at a density of 2.1 g/cm³. Prices exclude GST and transport.

DiameterTMT weight (kg/m)GFRP weight (kg/m)TMT at ₹65/kg (₹/m)GFRP at ₹140–160/kg (₹/m)
6 mm0.2220.05914.48.3 – 9.5
8 mm0.3950.10625.714.8 – 16.9
10 mm0.6170.16540.123.1 – 26.4
12 mm0.8890.23857.833.3 – 38.0
16 mm1.5800.422102.759.1 – 67.6
20 mm2.4690.660160.592.4 – 105.6
25 mm3.8581.031250.8144.3 – 164.9
32 mm6.3211.689410.9236.4 – 270.2

The saving is the same at every size — 34% at ₹160/kg, 42% at ₹140/kg — because the weight ratio between the two materials does not change with diameter.

A worked example: 1,000 metres of 10 mm

TMT barGFRP rebar
Weight617 kg165 kg
Rate₹65/kg₹140–160/kg
Material cost₹40,123₹23,091 – ₹26,389

Both before GST and transport.

If your TMT price is different

Work out the per-metre cost yourself in two steps:

  1. Weight per metre: TMT = d² ÷ 162. GFRP = d² × 0.00165. (d is the diameter in mm; the answer is in kg/m.)
  2. Cost per metre = weight per metre × price per kg.

At ₹55/kg TMT the per-metre saving narrows to about 22–32%; at ₹75/kg it widens to about 43–50%. Whatever the rate, comparing by the kilogram makes GFRP look about 3.7 times dearer, relative to TMT, than it is by the metre.

What the per-metre number does not tell you

This table compares a bar with a bar of the same size. That is the right way to compare prices, but it is not how a structure is designed.

GFRP is stronger than steel in tension but much less stiff, so GFRP members are usually designed for deflection and crack width rather than strength. Depending on the element, the design may call for more bars, closer spacing or a larger diameter than the steel version. The cost that matters is the cost of the designed quantity, not of one bar.

So use this page to understand the price, and use your structural engineer's quantities for the decision. Our cost calculator compares total project cost on your own quantities and rates, and our quantity calculator estimates how much rebar a slab, wall or tank needs.

What the material price leaves out

  • GST and transport are extra. We manufacture at Hojiwala Industrial Estate, Surat, and deliver across India; freight depends on distance and quantity.
  • Lighter loads. At about a quarter of the weight, the same length of bar takes less truck space and less manual handling on site.
  • No corrosion repair. GFRP does not rust. In coastal, sewage, chemical and wet environments, that is often the largest cost difference over a structure's life — see our comparison of GFRP and steel.
  • Bent shapes are made in the factory. GFRP cannot be bent on site like TMT, so include stirrups and bends in your order and ask for them in the quote.

Get an exact quote

Send us four things and we will reply with a price for your project:

  1. Diameters you need
  2. Quantity in metres or kilograms for each
  3. Straight lengths, coils or bent shapes
  4. Delivery location

Request a quote or message us on WhatsApp at +91 92279 90800.

Planning a project with GFRP rebar?

Send us the diameter and quantity you need and we will quote it. RN Elements manufactures in Surat and supplies across India.